- 供应商：
- 广州市中物机电设备有限公司
- 价格：
- 请来电询价
- 联系人：
- 陈良莲
- 联系电话：
- 020-83548941
- 传真号码：
- 020-83547983
- 电子邮件：
- 15099727288@163.com
- 邮政编码：
- 510370
- 公司地址：
- 广东省广州市越秀区广东省
- 商铺：
- mip.czvv.com/shop/14466388/
本机床用以加工各种件的平面、型面及键槽等，对单件或小批生产车间为适合。
主转动的机构是变摇柄齿轮的回转运动为滑枕的往复运动，工作台可作纵向、横向和回转，自动与手动进给并可实现快速移动，工作台遇有故障时则自动停止进给.本机床经心设计，标准化、通用化、系列化、自动化程度较高，布局合理，结构紧凑协调匀称。外形美观，维修方便。
机床使用三相交流电源,电压380伏,频率50赫. 对用户提出的其它电源条件，经过协商，可按特殊定货供应。
This machine tool is used process plsnes,model surfaces,key seating,etc,and it is suitable for the single-piece or small-batch production.The main transmission mechsnism is used for converting moting of the crank gear in to reciprocating moion of ram . the worktable us designed for ongirudinal ,cross and rotary feeding both auytomatically and manually..the feed is stopped automatically.when the worktable is in case of trouble.This machine is designed elaborately with high standardization,uniform ization ,systemation and has reasonable arrangement with compact and harmonical construcition,pleasing appearance,conveninent maintenance,The electric epuipment of this machine is suitable for 3-phasesA.C.power supply of 50 cycles.380V.Maims devices of vollages and or frequencies other than specified above can be suppoied according to the special order of users
This machine tool is used process plsnes,model surfaces,key seating,etc,and it is suitable for the single-piece or small-batch production workshop.The main transmission mechsnism is to transmit the throw-over motion of the rock er arm into the to-and-fro motion of the ram the operating plantform can move vertically and horizontally and revolve it is able to achieve autonatic feed and hand operating feed Also it can move fast in case of breakdown,the platform will autobatically stotp feeding and achieve limit safety.When the machine tool is startede,stop using electromagnetic clutch so as to achieve concentration operation operation of the machine tool .Indexing mechanism is used for the graduagionof the throw-over motion of the operating platform parts are processed according to the desired graduation .This machine is carefulluy designed and it is chaeacteristic of standardization ,generalization,serialization,high degree automation,also it is of reasonable diatrbutin,compact sructure ,well-balanced proportion ,good outer looks and convenient maintenance.The lubrication of the machine tool is brought by the oil pump,amd lubrication oil is transmitted to various points by the oil-transmitting rubes wth convenient adiustment.The electric equipment of the machine tool is fixed in the bed at the back part of the lower bed it is safe and reliable because there are cimcentrated push buttons in the upper bed.As for other power source conditions raised by the customer .special orders of goods supply can be effected through negoti-ation技术规格 MAIN SPECIFICATIONS
加工范围
Work range
B5020
B5032
插削长度
Max.slotting length
200mm
320mm
工件加工尺寸(长*宽)
Max.dimensions of wodplece(L*H)
485*200mmm
600*320mm
工件重量
Max.weight of workpiece
400kg
500kg
切削力
Max.cutting force
5500N
7500N
滑枕每分钟往复次数
No.of strokes per minutem
32,50,80,125,r ,p,m
20.32.50.80.r.p.m
滑枕垂直调整距离
Vertical ajustment of ram
230mm
315mm
滑枕倾斜角度
Inclination of ram
0-8度
0-8度
刀头支承面床身前壁间距离
Distance between tool holdingsurface and column front
485mm
600mm
插刀杆尺寸(宽*高)
Max.tool shank size (W*H)
25*40mm
25*40mm
工作台直径
Table diameter
500mm
630mm
工作台面滑架下端间距离
Distance between table surface and low end of ram
320mm
490mm
工作台纵向移动距离
Max.longitudinal travel of table
500mm
620mm
工作台横向移动距离
Max.cross travel of table
500mm
560mm
工作台纵横机动进给范围
Range of table longitudinal and cross power feeds
0.08-1.12mm
0.08-1.12mm
工作台回转机动进给范围
Range of table power feeds
0.052o-0.783deg
0.052°-0.7893deg
主电动机功率
Power of rapid drive motor
3kw
4kw
主电动机转速
Rotating speeed of main drive motor
1430r.p.m
960r.p.m
机床轮廓尺寸(长*宽*高)
Overall dimensions (L*W*H)
1945*1325*1980mm
2290*1525*2285mm
机床重量(约)
Weight(approx)
2400kg
3500kg